NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING
NN4940 Double-Row Cylindrical Roller Bearing Dimensions & Specifications
NN4940 double-row cylindrical roller bearing: 200 mm bore (d), 280 mm outside diameter (D), 80 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 200 mm |
|---|---|
| Outside diameter D | 280 mm |
| Mass | 15.3 kg |
| Catalogue dynamic load Cr | 484 kN |
| Catalogue static load Cor | 1040 kN |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 263 mm |
|---|---|
| Abutment dimension da | 216 mm |
| Minimum chamfer r12 | 2.1 mm |
| Minimum chamfer r34 | 2.1 mm |
| Maximum fillet ra | 2 mm |
| Maximum fillet rb | 2 mm |
| Catalogue speed (see source conditions) speed | 3000 rpm |
| Shared B/C dimension (catalogue column) BC | 80 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NN4940?
The NN4940 catalogue lists da min = 216 mm; Da max = 263 mm; ra max = 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of NN4940?
The catalogue reference mass for NN4940 is 15.3 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of NN4940?
In the ZQM General Catalogue, NN4940 has nominal boundary dimensions of Array. Catalog load ratings: Cr 484 kN, C0r 1040 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
What rib and bore features define NN4940 double-row cylindrical roller bearing?
NN4940 (200 × 280 × 80 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
DIRECT FACTORY SOURCING
Request a Quote for NN4940
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

