NN30 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3052 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3052 double-row cylindrical roller bearing: 260 mm bore (d), 400 mm outside diameter (D), 104 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 260 mmD 400 mmB/C 104 mmCr 1030 kNMass 47.7 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 260D 400B 104

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d260 mm
Outside diameter D400 mm
Mass47.7 kg
Catalogue dynamic load Cr1030 kN
Catalogue static load Cor1920 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da376 mm
Abutment dimension da282 mm
Minimum chamfer r124 mm
Minimum chamfer r344 mm
Maximum fillet ra3 mm
Maximum fillet rb3 mm
Catalogue speed (see source conditions) speed2200 rpm
Shared B/C dimension (catalogue column) BC104 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3052?

The NN3052 catalogue lists da min = 282 mm; Da max = 376 mm; ra max = 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3052?

The catalogue reference mass for NN3052 is 47.7 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3052?

In the ZQM General Catalogue, NN3052 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1030 kN, C0r 1920 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3052 double-row cylindrical roller bearing?

NN3052 (260 × 400 × 104 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3052

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top