540TQO760-1 Four-Row Tapered Roller Bearing 540 × 760 × 560 mm

ZQM 540TQO760-1 Compact-Section Metric TQO Four-Row Tapered Roller Bearing (540 × 760 × 560 mm, 809 kg, e = 0.33) engineered for multi-stand tandem cold and medium strip rolling mills.

SKU: 540TQO7601 Category:

Request a Quote

The ZQM 540TQO760-1 is a high-stiffness, compact-section metric TQO four-row tapered roller bearing engineered for multi-stand tandem cold mills, temper skin-pass mills, and medium-width strip stands where roll diameters constrain chock outside envelopes. Verified in ZQM’s factory catalogue (P236-R14-single) at 540 × 760 × 560 mm (overall width T) with a reference mass of 809 kg, its slender 110 mm radial wall enables large 540 mm roll necks while its long 560 mm axial span spreads rolling loads evenly across four wide roller rows.

540TQO760-1 Technical Specifications & Dimensions

Data Source: ZQM Factory PDF Catalogue DB (v1)Status: Catalogue Reference ValuesCatalogue Ref: 540TQO760-1
Parameter CategoryTechnical Parameter (Symbol)Catalogue Reference Value
Boundary Dimensions & WeightBore diameter (d)540 mm
Boundary Dimensions & WeightOutside diameter (D)760 mm
Boundary Dimensions & WeightOverall width (T)560 mm
Boundary Dimensions & WeightCatalogue design designation (design)1
Boundary Dimensions & WeightReference mass (Weight)809 kg
Calculation FactorsCalculation factor (e)0.33
Calculation FactorsAxial geometry factor (K)1.77
Calculation FactorsAxial load factor (static) (Y0)1.98
Calculation FactorsAxial load factor (Y1)2.03
Calculation FactorsAxial load factor (Y2)3.02

Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.

Why Tandem Cold & Skin-Pass Mills Select 540TQO760-1

  • High Neck-to-OD Efficiency (540 / 760 mm): Maximizes roll-neck torsional and bending rigidity inside tight cold-mill roll windows without enlarging backup-roll diameter.
  • Radial-Dominant Contact Geometry (e = 0.33, K = 1.77): Verified catalogue factors (Y1 = 2.03, Y2 = 3.02, Y0 = 1.98) optimize high-speed radial load distribution while securely restraining strip-mill axial forces.
  • Factory-Matched Spacer Endplay (BEN): Supplied as a complete serialized TQO Design 1 set with ground inner and outer spacers setting precise mounted axial play—never mix spacers across sets or apply radial feeler gauges.
  • Drawing-Verified Precision & Seals: Load ratings, precision running tolerances for cold-strip gauge stability, and integrated lip-seal options are confirmed directly against your stand drawing.

Nominal Metric Mill Cross-Reference

Manufacturer / Standard Nominal Designation Envelope & Mass
ZQM Bearings 540TQO760-1 540 × 760 × 560 mm (T) · 809 kg · e = 0.33
Metric TQO / 4R-TRB System 540×760×560 TQO Design 1 Nominal metric envelope; verify BEN spacer & oil slots

Engineering Disclaimer: Cross-references are strictly for nominal boundary dimension comparison (540 × 760 × 560 mm). Confirm exact axial clearance (BEN), helical bore grooves, and lubrication inlets against engineering drawings prior to purchase.

Cold-Mill Strip Gauge & Lubrication Practices

  1. Maintain tight chock-to-housing liner clearances so the 560 mm wide assembly does not skew under high strip tension.
  2. Filter circulating oil or oil-mist supply strictly to prevent cold-rolling emulsion cross-contamination and raceway micro-spalling.
  3. Inspect spacer contact faces for fretting during scheduled roll-shop rebuilds and keep all four rows matched to their original serial tag.

Frequently Asked Questions — 540TQO760-1

What are the verified dimensions and mass of 540TQO760-1?

Per ZQM factory catalogue record P236-R14-single: bore d = 540 mm, outside diameter D = 760 mm, overall width T = 560 mm, calculation factors e = 0.33 / Y1 = 2.03 / Y2 = 3.02 / Y0 = 1.98 / K = 1.77, and reference mass 809 kg.

How does 540TQO760-1 differ from 560TQO920-1 in mill layout?

540TQO760-1 has a much slimmer radial section (110 mm wall vs 180 mm on 560TQO920-1) and shallower contact angle (e = 0.33 vs 0.39), making it ideal for compact tandem cold mills and medium strip stands rather than extreme wide-plate roughers.

Can ZQM supply tighter runout tolerances on 540TQO760-1 for cold rolling gauge control?

Yes. Enhanced running accuracy grades and CMM-verified ring geometry can be specified and confirmed against your cold-mill engineering drawing prior to production.

Why must radial feeler gauges never be used to set 540TQO760-1 clearance?

Four-row tapered roller bearings operate on calibrated axial bench endplay (BEN) controlled by factory-ground matched spacers. Always rely on the serialized spacer assembly rather than radial feeler blades.

How can rolling mills request a factory quote for 540TQO760-1?

Send your stand drawing, required BEN clearance, seal preferences, and quantity via our Contact page for direct factory engineering review.

Scroll to Top