222 SERIES · SPHERICAL ROLLER BEARING

22222CA/W33 Spherical Roller Bearing Dimensions & Specifications

22222CA/W33 spherical roller bearing: 110 mm bore (d), 200 mm outside diameter (D), 53 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 110 mmD 200 mmB 53 mmCr 485 kNMass 6.99 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 110D 200B 53

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d110 mm
Outside diameter D200 mm
Width B53 mm
Mass6.99 kg
Catalogue dynamic load Cr485 kN
Catalogue static load Cor645 kN
Grease-lubricated speed2200 rpm
Oil-lubricated speed2800 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da188 mm
Abutment dimension da122 mm
Minimum chamfer r122.1 mm
Factor Y02.6
Factor Y12.7
Factor Y24
Factor e0.25
Maximum fillet ra2 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 22222CA/W33?

The 22222CA/W33 catalogue lists da min = 122 mm; Da max = 188 mm; ra max = 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 22222CA/W33?

The listed values for 22222CA/W33 are grease: 2200 rpm; oil: 2800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 22222CA/W33?

The catalogue reference mass for 22222CA/W33 is 6.99 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 110 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
24022CC/W33Spherical Roller Bearing110 × 170 × 60 mm
24022CA/W33Spherical Roller Bearing110 × 170 × 60 mm
23022CA/W33Spherical Roller Bearing110 × 170 × 45 mm
24122CC/W33Spherical Roller Bearing110 × 180 × 69 mm
24122CA/W33Spherical Roller Bearing110 × 180 × 69 mm
23122CA/W33Spherical Roller Bearing110 × 180 × 56 mm

Compare alternative series sharing the same 110 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 22222CA/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top