ZQM BEARINGS · PRODUCT SERIES

222 Series Spherical Roller Bearings

This page provides boundary dimensions and available technical specifications for 222 series spherical roller bearings, widely used across industrial gearboxes, conveyors, fans, and mining equipment.

222 series spherical roller bearing representative image
222 series representative image · For structural reference
34 ModelsCatalogue Rows Listed
100–750 mmBore Diameter (d)
Straight / 1:12 KBore / Design Feature
ISO 15Boundary Standard
SPECIFICATIONS

222 Series Dimensions & Technical Specifications

Select a complete model designation to view all available catalogue specifications. Dimensions in mm; load ratings in kN; mass in kg.

222 Series Structural Cross-Section Reference

Standard tapered bore for this series is 1:12 (suffix K) — distinct from the 1:30 taper (K30) used on 240/241 wide series.

W33Spherical Roller · Cylindrical BoredDB
Cylindrical Bore (CA / CC / MB / E + W33)Mounted directly on cylindrical shafts; outer ring W33 groove with three lubrication holes.
W33Spherical Roller · 1:12 Tapered Bore (K)dDB1:12 (K)
1:12 Tapered Bore (Suffix K · ISO 15 Small-End d)Pairs with H/HE/HA adapter sleeves or AH withdrawal sleeves for rapid mounting and clearance setting.

222 Series Master Size Chart

Source: ZQM Master PDF Catalogue (wp_zqm_models_v1) · ISO 15
Swipe horizontally to view full columns
Modeld / mmD / mmB / mmCr / kNCor / kNkg
22220CA/W33100180463654904.84
22222CA/W33110200534856456.99
22222CAK110200534856456.99
22224CA/W33120215585507658.8
22226CA/W331302306465594011
22228CA/W331402506864593014.5
22230CA/W3315027073765112018.4
22232CA/W3316029080910132023.1
22234CA/W3317031086990150028.8
22236CA/W33180320861020154030.2
22238CA/W33190340921140173035.5
22240CA/W33200360981300201042.6
22244CA/W332204001081570243059
22248CA/W332404401201870289080.2
22252CA/W3326048013021803400104
22256CA/W3328050013022803650110
22260CA/W3330054014026104250139
22264CA/W3332058015029904850174
22268CA/W3334062016534505600226
22272CA/W3336065017035535890255
22276CA/W3338068017540506950288
22280CA/W3340072018545507650343
22284CA/W3342076019550008300405
22288CAF3/W3344079020053008800446
22292CAF3/W33460830212585010200530
22296CAF3/W33480870224640011200613
222/500CAF3/W33500920243735012900758
222/530CAF3/W33530980258830014600914
222/560CAF3/W3356010302729000160001060
222/600CAF3/W3360010902809650173001180
222/630CAF3/W33630115030011000200001440
222/670CAF3/W33670122031512200224001700
222/710CAF3/W33710128032513700245001900
222/750CAF3/W33750136034514600270002340

A dash indicates the value is not confirmed in the current catalogue dataset. Matching ISO boundary dimensions alone do not confirm direct interchangeability across brands.

Bore taper & suffix guide: Tapered-bore 222 series spherical roller bearings use a 1:12 taper (suffix K) for mounting on H3xx / H31xx adapter sleeves (verify exact sleeve designation by bore size) or tapered shafts. Confirm complete cage suffixes (CA, CC, MB, E—material per OEM drawing), lubrication features (W33), and radial clearance (CN, C3, C4) before ordering.

Related resources & featured models: View 22256 CA/W33 Spherical Roller Bearing, read our Spherical Roller Bearing Cages Guide, C3 Bearing Clearance Guide, and Tapered Bore K vs K30 Sleeves, or contact ZQM Bearings.

SERIES FAQ

222 Series Selection & Supply FAQ

How many 222 series bearing models are listed, and what bore sizes are covered?

This table lists 34 verified 222 series designations from the ZQM General Catalogue spanning bore diameters from 100 mm to 750 mm. Open any model row to inspect full boundary dimensions, catalog load ratings, reference mass, and mounting abutments (da min / Da max / ra max).

What bore taper (K 1:12 vs K30) and clearance options apply to the 222 series?

Standard 222 series spherical roller bearings use cylindrical bore or 1:12 tapered bore (suffix K, compatible with standard H-series adapter sleeves where applicable; 1:30 K30 applies only to 240/241 series). Always verify radial clearance (CN, C3, C4) and cage design against the catalog or drawing.

Are 222 series dimensions directly interchangeable with SKF, FAG, NSK, or NTN?

Listed boundary dimensions follow ISO 15 / ISO 104 / ISO 355 nominal envelopes for cross-referencing against SKF, FAG, NSK, and NTN. Because internal roller geometry, cage design, lubrication grooves, and tolerance classes vary by manufacturer, nominal equivalence does not guarantee direct interchangeability — confirm full original designations or drawings before substitution.

How do I request a factory quote or CAD drawing for 222 series bearings?

Backed by our Wafangdian factory, Ningbo export team, and Shanghai consolidation hub, ZQM supports trial orders, mixed-model MRO lists, and scheduled OEM shipments. Submit your designations, bore/clearance specs, quantity, and destination port via our Contact Us page.

FROM SPECIFICATION TO SUPPLY

Request a Quotation for 222 Series Bearings

One model or a mixed industrial list. Share your complete designation, clearance, and quantity with ZQM Bearings Wafangdian factory & Ningbo export team.

1. Complete DesignationInclude full cage, lube & bore suffixes (CA/W33, EM, K/K30)
2. Bore & ClearanceSpecify straight vs. 1:12 K / 1:30 K30 and CN / C3 / C4
3. Operating ConditionsShare machine position, speed, load & QC documentation
4. Quantity & PackingConfirm trial lot or OEM volume, export crate & destination
Scroll to Top