248 SERIES · SPHERICAL ROLLER BEARING
248/1120CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
248/1120CAF3/W33 spherical roller bearing: 1120 mm bore (d), 1360 mm outside diameter (D), 243 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 1120 mm |
|---|---|
| Outside diameter D | 1360 mm |
| Width B | 243 mm |
| Mass | 735 kg |
| Catalogue dynamic load Cr | 6887 kN |
| Catalogue static load Cor | 22800 kN |
| Grease-lubricated speed | 130 rpm |
| Oil-lubricated speed | 170 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 1332 mm |
|---|---|
| Abutment dimension da | 1148 mm |
| Minimum chamfer r12 | 6 mm |
| Factor Y0 | 4.5 |
| Factor Y1 | 4.5 |
| Factor Y2 | 6.7 |
| Factor e | 0.15 |
| Maximum fillet ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 248/1120CAF3/W33?
The 248/1120CAF3/W33 catalogue lists da min = 1148 mm; Da max = 1332 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 248/1120CAF3/W33?
The listed values for 248/1120CAF3/W33 are grease: 130 rpm; oil: 170 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 248/1120CAF3/W33?
The catalogue reference mass for 248/1120CAF3/W33 is 735 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
| Model | Type | Dimensions (d×D×B) |
|---|---|---|
| 238/1120CAF3/W33 | Spherical Roller Bearing | 1120 × 1360 × 180 mm |
| 249/1120CAF1D/W33 | Spherical Roller Bearing | 1120 × 1460 × 500 mm |
| 249/1120CAF3/W33 | Spherical Roller Bearing | 1120 × 1460 × 335 mm |
| 239/1120CAF3/W33 | Spherical Roller Bearing | 1120 × 1460 × 250 mm |
| 230/1120X3CAF1D/W33 | Spherical Roller Bearing | 1120 × 1540 × 525 mm |
| 230/1120CAF3/W33 | Spherical Roller Bearing | 1120 × 1580 × 345 mm |
Compare alternative series sharing the same 1120 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
DIRECT FACTORY SOURCING
Request a Quote for 248/1120CAF3/W33
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

