231 SERIES · SPHERICAL ROLLER BEARING

231/630CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

231/630CAF3/W33 spherical roller bearing: 630 mm bore (d), 1030 mm outside diameter (D), 315 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 630 mmD 1030 mmB 315 mmCr 9600 kNMass 1040 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 630D 1030B 315

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d630 mm
Outside diameter D1030 mm
Width B315 mm
Mass1040 kg
Catalogue dynamic load Cr9600 kN
Catalogue static load Cor19400 kN
Grease-lubricated speed200 rpm
Oil-lubricated speed260 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da994 mm
Abutment dimension da666 mm
Minimum chamfer r127.5 mm
Factor Y02.2
Factor Y12.3
Factor Y23.4
Factor e0.3
Maximum fillet ra6 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 231/630CAF3/W33?

The 231/630CAF3/W33 catalogue lists da min = 666 mm; Da max = 994 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 231/630CAF3/W33?

The listed values for 231/630CAF3/W33 are grease: 200 rpm; oil: 260 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 231/630CAF3/W33?

The catalogue reference mass for 231/630CAF3/W33 is 1040 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 630 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
238/630CAF3/W33Spherical Roller Bearing630 × 780 × 112 mm
248/630CAF3/W33Spherical Roller Bearing630 × 780 × 150 mm
249/630CAF3/W33Spherical Roller Bearing630 × 850 × 212 mm
239/630CAF3/W33Spherical Roller Bearing630 × 850 × 165 mm
240/630CAF3/W33Spherical Roller Bearing630 × 920 × 290 mm
230/630CAF3/W33Spherical Roller Bearing630 × 920 × 212 mm

Compare alternative series sharing the same 630 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 231/630CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top