ZQM BEARINGS · PRODUCT SERIES

231 Series Spherical Roller Bearings

This page provides boundary dimensions and available technical data for 231 series spherical roller bearings. With a heavier cross-section than the 230 series for the same shaft diameter, the 231 series supports higher radial shock loads in mining crushers, vibrating equipment, and heavy industrial drives.

231 series spherical roller bearing representative image
231 series representative image · For structural reference
39 ModelsCatalogue Rows Listed
100–1000 mmBore Diameter (d)
Straight / 1:12 KBore / Design Feature
ISO 15Boundary Standard
SPECIFICATIONS

231 Series Dimensions & Technical Specifications

Select a complete model designation to view all available catalogue specifications. Dimensions in mm; load ratings in kN; mass in kg.

231 Series Structural Cross-Section Reference

Standard tapered bore for this series is 1:12 (suffix K) — distinct from the 1:30 taper (K30) used on 240/241 wide series.

W33Spherical Roller · Cylindrical BoredDB
Cylindrical Bore (CA / CC / MB / E + W33)Mounted directly on cylindrical shafts; outer ring W33 groove with three lubrication holes.
W33Spherical Roller · 1:12 Tapered Bore (K)dDB1:12 (K)
1:12 Tapered Bore (Suffix K · ISO 15 Small-End d)Pairs with H/HE/HA adapter sleeves or AH withdrawal sleeves for rapid mounting and clearance setting.

231 Series Master Size Chart

Source: ZQM Master PDF Catalogue (wp_zqm_models_v1) · ISO 15
Swipe horizontally to view full columns
Modeld / mmD / mmB / mmCr / kNCor / kNkg
23120CA/W33100165523455304.38
23122CA/W33110180563856305.7
23124CA/W33120200624657207.85
23126CA/W33130210645058258.69
23128CA/W331402256858094510.5
23130CA/W3315025080725118015.8
23132CA/W3316027086855140020.3
23134CA/W3317028088940157021.8
23136CA/W33180300961050176027.5
23136X2CAD/W33180300125713120030
23138CA/W331903201041190202034.5
23140CA/W332003401121360233042.7
23144CA/W332203701201570271053
23148CA/W332404001281790310066.9
23152CA/W332604401442160375088.2
23156CA/W332804601462230400094.3
23160CA/W3330050016026704800125
23160CAD/W3330050024027104900150
23164CA/W3332054017630505500162
23168CA/W3334058019036006600206
23172CA/W3336060019238007100217
23176CA/W3338062019440007600229
23180CA/W3340065020041507900257
23184CA/W3342070022450009400341
23188CAF3/W33440720226530010300360
23192CAF3/W33460760240570010900423
23196CAF3/W33480790248605011700475
231/500CAF3/W33500830264685013400567
231/530CAF3/W33530870272715014100628
231/560CAF3/W33560920280785015500727
231/600CAF3/W33600980300875017500898
231/630CAF3/W3363010303159600194001040
231/670CAF3/W33670109033610600216001230
231/710CAF3/W33710115034511800245001420
231/750CAF3/W33750122036513100273001700
231/800CAF3/W33800128037513800292001870
231/850CAF3/W33850136040015800340002260
231/900CAF3/W33900142041217000370002490
231/1000CAF3/W331000158046220330456003500

A dash indicates the value is not confirmed in the current catalogue dataset. Matching ISO boundary dimensions alone do not confirm direct interchangeability across brands.

Bore taper & engineering check: Tapered-bore 231 series bearings use a 1:12 taper (suffix K). Because operating speed, thermal expansion, and shock vibration strongly influence internal clearance selection, confirm CN, C3, or C4 clearance and cage construction suffixes (CA/MB/CC/CAF3—verify material per drawing) prior to sourcing.

Related resources & featured models: See 23160 CA/W33, compare 230 Series and 232 Series, read our Cage Design Guide, or contact ZQM Bearings.

SERIES FAQ

231 Series Selection & Supply FAQ

How many 231 series bearing models are listed, and what bore sizes are covered?

This table lists 39 verified 231 series designations from the ZQM General Catalogue spanning bore diameters from 100 mm to 1000 mm. Open any model row to inspect full boundary dimensions, catalog load ratings, reference mass, and mounting abutments (da min / Da max / ra max).

What bore taper (K 1:12 vs K30) and clearance options apply to the 231 series?

Standard 231 series spherical roller bearings use cylindrical bore or 1:12 tapered bore (suffix K, compatible with standard H-series adapter sleeves where applicable; 1:30 K30 applies only to 240/241 series). Always verify radial clearance (CN, C3, C4) and cage design against the catalog or drawing.

Are 231 series dimensions directly interchangeable with SKF, FAG, NSK, or NTN?

Listed boundary dimensions follow ISO 15 / ISO 104 / ISO 355 nominal envelopes for cross-referencing against SKF, FAG, NSK, and NTN. Because internal roller geometry, cage design, lubrication grooves, and tolerance classes vary by manufacturer, nominal equivalence does not guarantee direct interchangeability — confirm full original designations or drawings before substitution.

How do I request a factory quote or CAD drawing for 231 series bearings?

Backed by our Wafangdian factory, Ningbo export team, and Shanghai consolidation hub, ZQM supports trial orders, mixed-model MRO lists, and scheduled OEM shipments. Submit your designations, bore/clearance specs, quantity, and destination port via our Contact Us page.

FROM SPECIFICATION TO SUPPLY

Request a Quotation for 231 Series Bearings

One model or a mixed industrial list. Share your complete designation, clearance, and quantity with ZQM Bearings Wafangdian factory & Ningbo export team.

1. Complete DesignationInclude full cage, lube & bore suffixes (CA/W33, EM, K/K30)
2. Bore & ClearanceSpecify straight vs. 1:12 K / 1:30 K30 and CN / C3 / C4
3. Operating ConditionsShare machine position, speed, load & QC documentation
4. Quantity & PackingConfirm trial lot or OEM volume, export crate & destination
Scroll to Top