248 SERIES · SPHERICAL ROLLER BEARING

248/1060CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

248/1060CAF3/W33 spherical roller bearing: 1060 mm bore (d), 1280 mm outside diameter (D), 218 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1060 mmD 1280 mmB 218 mmCr 5795 kNMass 570 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 1060D 1280B 218

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1060 mm
Outside diameter D1280 mm
Width B218 mm
Mass570 kg
Catalogue dynamic load Cr5795 kN
Catalogue static load Cor19000 kN
Grease-lubricated speed140 rpm
Oil-lubricated speed180 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da1252 mm
Abutment dimension da1088 mm
Minimum chamfer r126 mm
Factor Y04.5
Factor Y14.8
Factor Y27.2
Factor e0.14
Maximum fillet ra5 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 248/1060CAF3/W33?

The 248/1060CAF3/W33 catalogue lists da min = 1088 mm; Da max = 1252 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 248/1060CAF3/W33?

The listed values for 248/1060CAF3/W33 are grease: 140 rpm; oil: 180 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 248/1060CAF3/W33?

The catalogue reference mass for 248/1060CAF3/W33 is 570 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 1060 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
230/1060X3CAF1D/W33Spherical Roller Bearing1060 × 1460 × 500 mm
N28/1060Cylindrical Roller Bearing1060 × 1280 × 128 mm
NU38/1060Cylindrical Roller Bearing1060 × 1280 × 165 mm

Compare alternative series sharing the same 1060 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 248/1060CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top