NN31 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3122 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3122 double-row cylindrical roller bearing: 110 mm bore (d), 180 mm outside diameter (D), 56 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 110 mmD 180 mmB/C 56 mmCr 290 kNMass 5.4 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 110D 180B 56

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d110 mm
Outside diameter D180 mm
Mass5.4 kg
Catalogue dynamic load Cr290 kN
Catalogue static load Cor450 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da170 mm
Abutment dimension da119 mm
Minimum chamfer r121.1 mm
Minimum chamfer r341.1 mm
Maximum fillet ra1 mm
Maximum fillet rb1 mm
Catalogue speed (see source conditions) speed3200 rpm
Shared B/C dimension (catalogue column) BC56 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3122?

The NN3122 catalogue lists da min = 119 mm; Da max = 170 mm; ra max = 1 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3122?

The catalogue reference mass for NN3122 is 5.4 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3122?

In the ZQM General Catalogue, NN3122 has nominal boundary dimensions of Array. Catalog load ratings: Cr 290 kN, C0r 450 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3122 double-row cylindrical roller bearing?

NN3122 (110 × 180 × 56 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3122

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top