NN39 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3920 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3920 double-row cylindrical roller bearing: 100 mm bore (d), 140 mm outside diameter (D), 30 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 100 mmD 140 mmB/C 30 mmCr 106 kNMass 1.32 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 100D 140B 30

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d100 mm
Outside diameter D140 mm
Mass1.32 kg
Catalogue dynamic load Cr106 kN
Catalogue static load Cor182 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da131 mm
Abutment dimension da109 mm
Minimum chamfer r121.1 mm
Minimum chamfer r341.1 mm
Maximum fillet ra1 mm
Maximum fillet rb1 mm
Catalogue speed (see source conditions) speed6300 rpm
Shared B/C dimension (catalogue column) BC30 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3920?

The NN3920 catalogue lists da min = 109 mm; Da max = 131 mm; ra max = 1 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3920?

The catalogue reference mass for NN3920 is 1.32 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3920?

In the ZQM General Catalogue, NN3920 has nominal boundary dimensions of Array. Catalog load ratings: Cr 106 kN, C0r 182 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3920 double-row cylindrical roller bearing?

NN3920 (100 × 140 × 30 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3920

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top