NN39 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3924 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3924 double-row cylindrical roller bearing: 120 mm bore (d), 165 mm outside diameter (D), 34 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 120 mmD 165 mmB/C 34 mmCr 138 kNMass 2.02 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 120D 165B 34

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d120 mm
Outside diameter D165 mm
Mass2.02 kg
Catalogue dynamic load Cr138 kN
Catalogue static load Cor251 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da155 mm
Abutment dimension da130 mm
Minimum chamfer r121.1 mm
Minimum chamfer r341.1 mm
Maximum fillet ra1 mm
Maximum fillet rb1 mm
Catalogue speed (see source conditions) speed5300 rpm
Shared B/C dimension (catalogue column) BC34 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3924?

The NN3924 catalogue lists da min = 130 mm; Da max = 155 mm; ra max = 1 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3924?

The catalogue reference mass for NN3924 is 2.02 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3924?

In the ZQM General Catalogue, NN3924 has nominal boundary dimensions of Array. Catalog load ratings: Cr 138 kN, C0r 251 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3924 double-row cylindrical roller bearing?

NN3924 (120 × 165 × 34 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3924

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top