NN39 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING
NN3930 Double-Row Cylindrical Roller Bearing Dimensions & Specifications
NN3930 double-row cylindrical roller bearing: 150 mm bore (d), 210 mm outside diameter (D), 45 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 150 mm |
|---|---|
| Outside diameter D | 210 mm |
| Mass | 4.47 kg |
| Catalogue dynamic load Cr | 262 kN |
| Catalogue static load Cor | 490 kN |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 196 mm |
|---|---|
| Abutment dimension da | 163 mm |
| Minimum chamfer r12 | 2 mm |
| Minimum chamfer r34 | 2 mm |
| Maximum fillet ra | 2 mm |
| Maximum fillet rb | 2 mm |
| Catalogue speed (see source conditions) speed | 4300 rpm |
| Shared B/C dimension (catalogue column) BC | 45 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NN3930?
The NN3930 catalogue lists da min = 163 mm; Da max = 196 mm; ra max = 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of NN3930?
The catalogue reference mass for NN3930 is 4.47 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of NN3930?
In the ZQM General Catalogue, NN3930 has nominal boundary dimensions of Array. Catalog load ratings: Cr 262 kN, C0r 490 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
What rib and bore features define NN3930 double-row cylindrical roller bearing?
NN3930 (150 × 210 × 45 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
DIRECT FACTORY SOURCING
Request a Quote for NN3930
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

