NN39 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3934 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3934 double-row cylindrical roller bearing: 170 mm bore (d), 230 mm outside diameter (D), 45 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 170 mmD 230 mmB/C 45 mmCr 280 kNMass 5.01 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 170D 230B 45

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d170 mm
Outside diameter D230 mm
Mass5.01 kg
Catalogue dynamic load Cr280 kN
Catalogue static load Cor550 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da216 mm
Abutment dimension da183 mm
Minimum chamfer r122 mm
Minimum chamfer r342 mm
Maximum fillet ra2 mm
Maximum fillet rb2 mm
Catalogue speed (see source conditions) speed3800 rpm
Shared B/C dimension (catalogue column) BC45 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3934?

The NN3934 catalogue lists da min = 183 mm; Da max = 216 mm; ra max = 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3934?

The catalogue reference mass for NN3934 is 5.01 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3934?

In the ZQM General Catalogue, NN3934 has nominal boundary dimensions of Array. Catalog load ratings: Cr 280 kN, C0r 550 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3934 double-row cylindrical roller bearing?

NN3934 (170 × 230 × 45 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3934

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top