NN39 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3944 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3944 double-row cylindrical roller bearing: 220 mm bore (d), 300 mm outside diameter (D), 60 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 220 mmD 300 mmB/C 60 mmCr 440 kNMass 11.4 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 220D 300B 60

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d220 mm
Outside diameter D300 mm
Mass11.4 kg
Catalogue dynamic load Cr440 kN
Catalogue static load Cor895 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da283 mm
Abutment dimension da236 mm
Minimum chamfer r122.1 mm
Minimum chamfer r342.1 mm
Maximum fillet ra2 mm
Maximum fillet rb2 mm
Catalogue speed (see source conditions) speed2800 rpm
Shared B/C dimension (catalogue column) BC60 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3944?

The NN3944 catalogue lists da min = 236 mm; Da max = 283 mm; ra max = 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3944?

The catalogue reference mass for NN3944 is 11.4 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3944?

In the ZQM General Catalogue, NN3944 has nominal boundary dimensions of Array. Catalog load ratings: Cr 440 kN, C0r 895 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3944 double-row cylindrical roller bearing?

NN3944 (220 × 300 × 60 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3944

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top