NN39 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3992 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3992 double-row cylindrical roller bearing: 460 mm bore (d), 620 mm outside diameter (D), 118 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 460 mmD 620 mmB/C 118 mmCr 1610 kNMass 94.5 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 460D 620B 118

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d460 mm
Outside diameter D620 mm
Mass94.5 kg
Catalogue dynamic load Cr1610 kN
Catalogue static load Cor3700 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da591 mm
Abutment dimension da486 mm
Minimum chamfer r124 mm
Minimum chamfer r344 mm
Maximum fillet ra3 mm
Maximum fillet rb3 mm
Catalogue speed (see source conditions) speed1200 rpm
Shared B/C dimension (catalogue column) BC118 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3992?

The NN3992 catalogue lists da min = 486 mm; Da max = 591 mm; ra max = 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3992?

The catalogue reference mass for NN3992 is 94.5 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3992?

In the ZQM General Catalogue, NN3992 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1610 kN, C0r 3700 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3992 double-row cylindrical roller bearing?

NN3992 (460 × 620 × 118 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3992

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top