NN40 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN4048 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN4048 double-row cylindrical roller bearing: 240 mm bore (d), 360 mm outside diameter (D), 118 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 240 mmD 360 mmB/C 118 mmCr 1240 kNMass 39.3 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 240D 360B 118

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d240 mm
Outside diameter D360 mm
Mass39.3 kg
Catalogue dynamic load Cr1240 kN
Catalogue static load Cor2600 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da340 mm
Abutment dimension da259 mm
Minimum chamfer r123 mm
Minimum chamfer r343 mm
Maximum fillet ra2.5 mm
Maximum fillet rb2.5 mm
Catalogue speed (see source conditions) speed2400 rpm
Shared B/C dimension (catalogue column) BC118 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN4048?

The NN4048 catalogue lists da min = 259 mm; Da max = 340 mm; ra max = 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN4048?

The catalogue reference mass for NN4048 is 39.3 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN4048?

In the ZQM General Catalogue, NN4048 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1240 kN, C0r 2600 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN4048 double-row cylindrical roller bearing?

NN4048 (240 × 360 × 118 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Other Bearing Series with 240 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
61848MADeep Groove Ball Bearing240 × 300 × 28 mm

Compare alternative series sharing the same 240 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN4048

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top