NN40 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN4060 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN4060 double-row cylindrical roller bearing: 300 mm bore (d), 460 mm outside diameter (D), 160 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 300 mmD 460 mmB/C 160 mmCr 1920 kNMass 97.6 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 300D 460B 160

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d300 mm
Outside diameter D460 mm
Mass97.6 kg
Catalogue dynamic load Cr1920 kN
Catalogue static load Cor4100 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da435 mm
Abutment dimension da323 mm
Minimum chamfer r124 mm
Minimum chamfer r344 mm
Maximum fillet ra3 mm
Maximum fillet rb3 mm
Catalogue speed (see source conditions) speed1300 rpm
Shared B/C dimension (catalogue column) BC160 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN4060?

The NN4060 catalogue lists da min = 323 mm; Da max = 435 mm; ra max = 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN4060?

The catalogue reference mass for NN4060 is 97.6 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN4060?

In the ZQM General Catalogue, NN4060 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1920 kN, C0r 4100 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN4060 double-row cylindrical roller bearing?

NN4060 (300 × 460 × 160 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN4060

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top