NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN4932 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN4932 double-row cylindrical roller bearing: 160 mm bore (d), 220 mm outside diameter (D), 60 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 160 mmD 220 mmB/C 60 mmCr 330 kNMass 6.77 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 160D 220B 60

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d160 mm
Outside diameter D220 mm
Mass6.77 kg
Catalogue dynamic load Cr330 kN
Catalogue static load Cor680 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da206 mm
Abutment dimension da173 mm
Minimum chamfer r122 mm
Minimum chamfer r342 mm
Maximum fillet ra2 mm
Maximum fillet rb2 mm
Catalogue speed (see source conditions) speed4000 rpm
Shared B/C dimension (catalogue column) BC60 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN4932?

The NN4932 catalogue lists da min = 173 mm; Da max = 206 mm; ra max = 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN4932?

The catalogue reference mass for NN4932 is 6.77 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN4932?

In the ZQM General Catalogue, NN4932 has nominal boundary dimensions of Array. Catalog load ratings: Cr 330 kN, C0r 680 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN4932 double-row cylindrical roller bearing?

NN4932 (160 × 220 × 60 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN4932

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top