QJF10 SERIES · FOUR-POINT CONTACT BALL BEARING

QJF1044X1MA Four-Point Contact Ball Bearing Dimensions & Specifications

QJF1044X1MA four-point contact ball bearing: 220 mm bore (d), 339.5 mm outside diameter (D), 56 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 220 mmD 339.5 mmB 56 mmCr 442 kNMass 17.8 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Point Contact Ball Bearing (Split Ring)d 220D 339.5B 56

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings. Note: Specific split-ring configuration (inner vs. outer ring) for QJF designations is confirmed per engineering drawing.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d220 mm
Outside diameter D339.5 mm
Width B56 mm
Mass17.8 kg
Catalogue dynamic load Cr442 kN
Catalogue static load Cor750 kN
Grease-lubricated speed1300 rpm
Oil-lubricated speed1800 rpm
Mounting dimensions & additional parameters (10)
Abutment dimension Da326 mm
Abutment dimension da234 mm
Minimum chamfer r123.0 mm
Factor X0.6
Factor Y00.58
Factor Y10.66
Factor Y21.07
Factor e0.95
Maximum fillet ra2.5 mm
Load centre dimension a196 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for QJF1044X1MA?

The QJF1044X1MA catalogue lists da min = 234 mm; Da max = 326 mm; ra max = 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for QJF1044X1MA?

The listed values for QJF1044X1MA are grease: 1300 rpm; oil: 1800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of QJF1044X1MA?

The catalogue reference mass for QJF1044X1MA is 17.8 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

How should QJF1044X1MA four-point contact ball bearing be loaded and mounted?

QJF1044X1MA (220 × 339.5 × 56 mm) is designed for pure axial or predominantly axial bidirectional loads. When paired with a cylindrical roller bearing strictly as an axial locating unit, provide radial clearance between the outer ring and housing bore so it carries no radial load. Confirm specific split-ring configuration (inner vs. outer ring) for this QJF designation per drawing.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for QJF1044X1MA

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top