1312 Self-Aligning Ball Bearing 60 × 130 × 31 mm

Medium Series 03 ISO 15 1312 self-aligning ball bearing sized 60 × 130 × 31 mm, engineered for grain elevator bucket-belt head pulleys and quarry screen drive jackshafts in SNL/SN plummer blocks. Available in 60 mm cylindrical bore or 1:12 tapered 1312K with H312 sleeve (55 mm shaft).

Request a Quote

The 1312 self-aligning ball bearing (60 × 130 × 31 mm, ISO 15 Dimension Series 03) steps up to a thicker radial wall and larger ball complement than light Series 02 units sharing the same 60 mm shaft. Designed for grain elevator bucket-belt head pulleys and quarry screening-plant drive jackshafts mounted in split SNL/SN plummer blocks, it accommodates belt-tension bending smoothly across tall fabricated frames. Specify straight 60 mm bore or 1312K (1:12 tapered bore) combined with an H312 adapter sleeve for 55 mm transmission shafting.

ISO 15 Series 03 Spec Code 1312 Nominal Value Quarry / Elevator Reference
Bore (Straight Execution) d 60 mm Stepped shaft journal fit
Outside Diameter D 130 mm Medium Series 03 (SNL 513-610 / 213)
Bearing Width B 31 mm 15 mm slimmer than wide 2312 (46 mm)
Tapered Bore Option 1312K 1:12 Tapered Bore Matches H312 sleeve on 55 mm shaft
Misalignment Absorption Sphered Outer Ring ~2.5° – 3° Self-Aligning Double-row balls, low running heat
Ratings, Speed & Weight Cr / C0r / rpm / Mass Factory Print Confirmed Finalized per cage & clearance at quote

1312 Medium-Section Resilience Under Belt-Tension Shaft Deflection

At the top of a 35-meter bucket-leg casing or along an aggregate-yard jackshaft driving multi-strand V-belts, heavy tension loads bow a 60 mm shaft visibly between bolted cast-iron pedestals. Light 1212 bearings (110 × 22 mm) often reach fatigue limits prematurely under sustained head-pulley pull, yet heavy roller bearings generate unwanted friction heat on fast, moderate-load drive countershafts. The medium Series 03 1312 bridges that gap: its 130 mm outer diameter and 31 mm width pack larger steel balls into a sturdy cross-section while retaining full ~2.5°–3° spherical self-alignment.

Observe one vital application boundary on aggregate machinery: 1312 performs reliably on the drive jackshaft and belt countershafts feeding a quarry screen, whereas the vibrating screen’s own eccentric exciter shaft suffers severe G-force acceleration and strictly requires dedicated spherical roller vibrator bearings (such as 223-series E/VA405 designs). Depending on outdoor ambient heat and lubricant service, ZQM confirms stamped steel, machined brass, or polyamide retainers alongside exact load capacities and clearance grades on your pre-production drawing.

1312 International Interchange & Width Disambiguation vs 2312

Before issuing a breakdown purchase order for a 130 mm plummer block, verify ring width carefully—1312 measures 31 mm wide, whereas wide heavy-series 2312 occupies 46 mm inside the same 130 mm housing diameter:

Brand / Code Standard Cylindrical Bore 1:12 Tapered Bore Maintenance Notes
ZQM Bearings 1312 1312K 31 mm width; cage & CN/C3 confirmed on print
SKF 1312 ETN9 / 1312 1312 EKTN9 / 1312 K Verify TN9 polyamide vs stamped steel cage
FAG / Schaeffler 1312-TVH / 1312-M 1312-K-TVH / 1312-K-M TVH = polymer; M = solid brass retainer
NSK / NTN / KOYO 1312 1312K Check suffix for cage type & C3 clearance
Legacy GB Code 1312 11312 Historical Chinese grain-mill drawing codes

Interchange Scope: Equivalent codes verify ISO 15 boundary parity (60 × 130 × 31 mm) strictly. Internal ball geometry, cage alloys, and load capacities vary by producer and must be verified against equipment drawings prior to direct substitution.

Plummer-Block Sealing, H312 Drive-Up & Dust-Purge Practice

Outdoor grain terminals and crushed-stone yards inside bulk conveyor and material-handling installations expose open pedestal bearings to abrasive silica grit, organic chaff, and rain washdown. Pairing open 1312 units inside split SNL 513-610 housings with taconite labyrinth seals or double-lip rubber seals—backed by scheduled grease purging—creates an outward barrier that stops grit before it scars the polished spherical track.

On unmachined 55 mm drive shafts, clamping a 1312K via an H312 adapter sleeve lets field mechanics dial in pulley axial alignment quickly. Because tapered-bore drive-up expands the inner ring and reduces internal play, measure clearance reduction diligently and consider C3 clearance when thermal gradients or tight sleeve clamping apply.

Specifying 1312 & 1312K for Agribusiness & Quarry Spares

Include these details in your RFQ so our technical team can prepare an accurate quotation: straight 60 mm bore vs 1312K with H312 sleeve, width verification (31 mm vs 46 mm), steel or brass vs polyamide cage preference, radial clearance (CN or C3), and shipment volume. Every order ships against a formal factory engineering drawing.

Get 1312 Technical Print & Lead-Time Quote

1312 Technical FAQ for Elevator & Quarry Drive Maintenance

Related Selection & Comparison: Compare wider heavy-duty 2312 (60 × 130 × 46 mm) or lighter 1212 (60 × 110 × 22 mm), decode K/TVH/M suffixes in our Bearing Suffix Decoder, verify H312 drive-up via the Tapered Bore Calculator, or view Self-Aligning Ball Bearings.

Can a 1312 fit inside the same 130 mm plummer block machined for a 2312?

Both share a 60 mm bore and 130 mm outside diameter, but 1312 is 31 mm wide compared with 46 mm for 2312. Fitting 1312 into a wider housing cavity requires matched locating rings, and you cannot drop a 46 mm 2312 into a 31 mm seat.

Which shaft diameter pairs with a 1312K tapered bearing and H312 adapter sleeve?

The 1312K has a 1:12 tapered bore that mounts securely onto a 55 mm plain shaft when installed with an ISO 2982-1 H312 adapter sleeve, locknut, and lockwasher.

Is 1312 suitable for the main eccentric vibrator shaft of a quarry rock screen?

No. Use 1312 only on auxiliary belt-drive jackshafts and head-pulley countershafts. High-acceleration vibrating screen eccentrics demand specialized spherical roller bearings engineered for extreme centrifugal shock.

How do maintenance teams keep quarry dust and grain husks out of open 1312 bearings?

Mount the 1312 inside a split SNL/SN plummer block equipped with double-lip or grease-filled labyrinth seals and replenish clean lithium-complex EP grease periodically to flush contaminants outward.

Why is C3 radial clearance often requested for 1312K adapter-sleeve installations?

Driving the 1:12 tapered inner ring up the H312 sleeve expands the raceway and consumes initial internal clearance; C3 provides additional operating margin under sun-heated casings or warm belt-drive runs.

Scroll to Top