,

6324 Deep Groove Ball Bearing 120 × 260 × 55 mm

Heavy-duty ISO 63-series 6324 deep groove ball bearing (120 × 260 × 55 mm, 12.2 kg) rated at 208 kN dynamic and 186 kN static capacity for 400+ kW quarry crusher and ball-mill auxiliary electric drive motors.

Request a Quote

Driving a primary jaw crusher flywheel or turning a ball-mill pinion gearbox across open-pit limestone and granite quarries subjects 400 to 630 kW electric motors to brutal coupling shocks, multi-ton rotor inertia, and choking clouds of abrasive rock dust. Weighing a formidable 12.2 kg across a heavy 120 × 260 × 55 mm envelope, the ZQM 6324 deep groove ball bearing delivers 208 kN basic dynamic load capacity (Cr), 186 kN static shock strength (C0r), and 2,400 rpm grease / 3,000 rpm oil speed limits engineered for severe mineral-processing drivetrains.

6324 Technical Specifications & Dimensions

Data Source: ZQM Factory PDF Catalogue DB (v1)Status: Catalogue Reference ValuesCatalogue Ref: 6324
Parameter CategoryTechnical Parameter (Symbol)Catalogue Reference Value
Boundary Dimensions & WeightBore diameter (d)120 mm
Boundary Dimensions & WeightOutside diameter (D)260 mm
Boundary Dimensions & WeightWidth (B)55 mm
Boundary Dimensions & WeightReference mass (Weight)12.2 kg
Load Ratings & Limiting SpeedsBasic dynamic load rating (Cr)208 kN
Load Ratings & Limiting SpeedsBasic static load rating (Cor)186 kN
Load Ratings & Limiting SpeedsLimiting speed (grease)2400 rpm
Load Ratings & Limiting SpeedsLimiting speed (oil)3000 rpm
Abutment & Fillet DimensionsShaft abutment diameter (da)133 mm
Abutment & Fillet DimensionsHousing abutment diameter (Da)247 mm
Abutment & Fillet DimensionsMinimum chamfer dimension (r12)3.0 mm
Abutment & Fillet DimensionsMaximum fillet radius (ra)2.5 mm
Calculation FactorsCalculation factor (f0)13

Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.

Heavy 63-Series Structural Strength in 400+ kW Quarry Motors

When heavy 6-pole and 8-pole quarry motors start across-the-line or absorb sudden crusher jam torques, thick rings and deep raceways separate multi-year uptime from catastrophic mid-shift burnouts:

  • 208 kN Dynamic & 186 kN Static Reserve: Enlarging the 120 mm bore package to 260 mm OD × 55 mm width doubles mass over a 6224 (12.2 kg vs 5.26 kg) and boosts static brinelling safety by 58%, absorbing heavy flexible-coupling misalignment kicks cleanly.
  • Axial Rotor Pinning with f0 = 13: Deep symmetric raceways arrest magnetic-center axial hunting and coupling push-pull shocks reliably, calibrated through ISO calculation factor f0 = 13.
  • High-Thermal-Delta C3 Fit Readiness: High-voltage 400+ kW stators generate substantial rotor core heat while cold quarry wind chills the cast endbell; ordering C3 radial clearance prevents radial preload lockup under heavy m6 shaft interference fits.
  • Abrasive Quarry Dust Barrier Strategy: Open 6324 units mounted inside grease-purged cast-iron labyrinth housings let maintenance crews flush contaminated outer grease seals regularly, while sealed -2RS options can be evaluated where speed and duty permit.

ISO 15 Nominal Boundary Cross-Reference for 6324

Supplier Reference Code Bore d OD D Width B Heavy Motor Execution Note
ZQM 6324 120 mm 260 mm 55 mm Open heavy-series catalog base; C3/M-cage per order
SKF 6324 / 6324/C3 120 mm 260 mm 55 mm Explorer steel or machined brass M cage
FAG / Schaeffler 6324 / 6324-M-C3 120 mm 260 mm 55 mm Solid brass cage for high vibration motors
NSK 6324 / 6324MC3 120 mm 260 mm 55 mm Heavy quarry & mill motor standard
NTN / Koyo 6324 / 6324C3 120 mm 260 mm 55 mm Open, shielded ZZ, and heavy-duty options

Interchange boundary notice: Codes listed above correspond exclusively on the ISO 15 external footprint (120 × 260 × 55 mm). Cage design (stamped steel vs solid brass M), radial clearance class, and vibration damping differ by manufacturer; verify heavy-motor OEM build sheets prior to substitution.

Quarry Crusher & Mill Motor 6324 Installation & Dust-Exclusion Guide

  1. Check Heavy Endbell & Shaft Abutments: Machine shaft shoulders to da ≥ 133 mm and motor endshield housing lips to Da ≤ 247 mm, capping fillet radii at ra ≤ 2.5 mm inside the 3.0 mm minimum bearing chamfer so the heavy 55 mm rings seat squarely.
  2. Use Induction Heating on 120 mm Interference Shafts: Heating the 12.2 kg 6324 evenly to 100–110 °C on a yoke-type induction heater drops it effortlessly over an m6 motor shaft journal, preserving raceway geometry without hydraulic press scoring.
  3. Deploy Positive-Purge Labyrinth & V-Ring Sealing: Silica quarry fines rapidly abrade bearing steel. Pack external V-ring and multi-groove labyrinth cavities with sticky water-resistant lithium-complex EP2 grease, creating a sacrificial dust barrier ahead of the clean inner 6324 cavity.
  4. Monitor Relubrication & Vibration Baselines: At 740–1,480 rpm (far inside the 2,400 rpm grease ceiling), track monthly envelope acceleration readings and purge spent grease through bottom drain plugs during scheduled crusher liner swaps.

Outfitting 400+ kW quarry crusher motors, aggregate conveyors, or ball-mill auxiliary drives? Request C3 clearance and solid brass cage (M) availability via our mining & quarry bearing desk.

400+ kW Quarry & Ball-Mill Motor 6324 Technical FAQ

Related Selection & Comparison: Compare medium-section 120 mm options with 6224 or step up to a 140 mm generator shaft with 6028; inspect quarry drive setups in our Mining & Crushing Hub.

When should a 400 kW quarry motor upgrade to a machined brass cage (6324 M/C3) over a pressed steel cage?

When severe ground-transmitted vibration from an adjacent primary jaw crusher or frequent hard-rock jam shocks shake the motor frame continuously, a solid machined brass cage (M) resists rivet fatigue and pocket cracking far better than standard stamped steel.

Can a 6324 run on the drive end of a belt-driven 400 kW crusher motor?

Usually no—heavy multi-band V-belt drives on 400+ kW crushers generate immense radial overhung pull that mandates a cylindrical roller bearing (NU 324) at the drive end, pairing with a locating 6324/C3 at the non-drive end to fix rotor axial position.

Why is ambient quarry dust so destructive to a 6324 even when loads are well below 208 kN?

Hard quartz and granite dust particles exceed the hardness of hardened bearing steel. Once fine grit bridges the seal into the grease film, three-body abrasive wear rapidly increases radial clearance, accelerates skidding, and triggers premature spalling.

What shaft fit and clearance combination prevents inner-ring creep on a 120 mm heavy motor?

Heavy 400+ kW motors typically pair an m6 shaft interference fit with a C3 radial internal clearance bearing so the 120 mm bore stays locked tight under peak starting torque while keeping healthy running clearance at operating rotor temperature.

Scroll to Top