232 SERIES · SPHERICAL ROLLER BEARING

232/630CA/W33 Spherical Roller Bearing Dimensions & Specifications

232/630CA/W33 spherical roller bearing: 630 mm bore (d), 1150 mm outside diameter (D), 412 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 630 mmD 1150 mmB 412 mmCr 13400 kNMass 1850 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 630D 1150B 412

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d630 mm
Outside diameter D1150 mm
Width B412 mm
Mass1850 kg
Catalogue dynamic load Cr13400 kN
Catalogue static load Cor25600 kN
Grease-lubricated speed180 rpm
Oil-lubricated speed240 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da1096 mm
Abutment dimension da684 mm
Minimum chamfer r1212 mm
Factor Y01.8
Factor Y11.9
Factor Y22.8
Factor e0.36
Maximum fillet ra10 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 232/630CA/W33?

The 232/630CA/W33 catalogue lists da min = 684 mm; Da max = 1096 mm; ra max = 10 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 232/630CA/W33?

The listed values for 232/630CA/W33 are grease: 180 rpm; oil: 240 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 232/630CA/W33?

The catalogue reference mass for 232/630CA/W33 is 1850 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 630 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
238/630CAF3/W33Spherical Roller Bearing630 × 780 × 112 mm
248/630CAF3/W33Spherical Roller Bearing630 × 780 × 150 mm
249/630CAF3/W33Spherical Roller Bearing630 × 850 × 212 mm
239/630CAF3/W33Spherical Roller Bearing630 × 850 × 165 mm
240/630CAF3/W33Spherical Roller Bearing630 × 920 × 290 mm
230/630CAF3/W33Spherical Roller Bearing630 × 920 × 212 mm

Compare alternative series sharing the same 630 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 232/630CA/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top