ZQM BEARINGS · PRODUCT SERIES

232 Series Spherical Roller Bearings

This page summarizes catalogue dimensions and technical specifications for 232 series spherical roller bearings. Featuring a wide, heavy-duty cross-section, the 232 series delivers high radial and combined load capacity for jaw crushers, cement mills, steel rolling mill auxiliary drives, and heavy mining machinery.

232 series spherical roller bearing representative image
232 series representative image · For structural reference
42 ModelsCatalogue Rows Listed
100–900 mmBore Diameter (d)
Straight / 1:12 KBore / Design Feature
ISO 15Boundary Standard
SPECIFICATIONS

232 Series Dimensions & Technical Specifications

Select a complete model designation to view all available catalogue specifications. Dimensions in mm; load ratings in kN; mass in kg.

232 Series Structural Cross-Section Reference

Standard tapered bore for this series is 1:12 (suffix K) — distinct from the 1:30 taper (K30) used on 240/241 wide series.

W33Spherical Roller · Cylindrical BoredDB
Cylindrical Bore (CA / CC / MB / E + W33)Mounted directly on cylindrical shafts; outer ring W33 groove with three lubrication holes.
W33Spherical Roller · 1:12 Tapered Bore (K)dDB1:12 (K)
1:12 Tapered Bore (Suffix K · ISO 15 Small-End d)Pairs with H/HE/HA adapter sleeves or AH withdrawal sleeves for rapid mounting and clearance setting.

232 Series Master Size Chart

Source: ZQM Master PDF Catalogue (wp_zqm_models_v1) · ISO 15
Swipe horizontally to view full columns
Modeld / mmD / mmB / mmCr / kNCor / kNkg
23220CA/W3310018060.34206056.6
23222CA/W3311020069.85157609.54
23224CA/W331202157663097012.1
23226CA/W3313023080700108014.3
23228CA/W3314025088835130018.8
23230CA/W3315027096975156024.2
23232CA/W331602901041100177030.5
23234CA/W331703101101200191036.4
23236CA/W331803201121300211038.9
23238CA/W331903401201440235047.6
23240CA/W332003601281660275057.1
23244CA/W332204001442020340080.4
23244X2CA/W332204001502040340081.9
23248CA/W3324044016024404050106
23252CA/W3326048017427404550137
23256CA/W3328050017628804900147
23256CAD/W3328050026027104650175
23260CA/W3330054019234005900189
23264CA/W3332058020839006900239
23264X2CA/W3332058021340007050241
23268CA/W3334062022444007800295
23272CA/W3336065023248008550342
23276CA/W3338068024051509200372
23276X2CA/W3338068024552509650382
23280CA/W33400720256580010400449
23280X2CA/W33400720260585010600457
23284CA/W33420760272645011700534
23288CAF3/W33440790280690012800594
23288X2CAF3/W33440790285690012800595
23292CAF3/W33460830296735013700691
23296CAF3/W33480870310785014400795
232/500CAF3/W33500920336900016600969
232/530CAF3/W3353098035510100188001170
232/560CAF3/W33560103036510900205001320
232/600CAF3/W33600109038812700249001590
232/630CA/W33630115041213400256001850
232/670CAF3/W33670122043814900287002210
232/710CAF3/W33710128045015700305002470
232/750CAF3/W33750136047517700355002980
232/800CAF3/W33800142048820300410003250
232/850CAF3/W33850150051522300455003890
232/900CAF3/W33900158051523400475004300

A dash indicates the value is not confirmed in the current catalogue dataset. Matching ISO boundary dimensions alone do not confirm direct interchangeability across brands.

Bore taper & suffix guide: Tapered-bore 232 series bearings use a 1:12 taper (suffix K). For high-impact or elevated-temperature positions, confirm complete cage suffixes (CA/MB/CC/CAF3—material verified against drawing), W33 relubrication features, and appropriate clearance (commonly C3 or C4 depending on shaft fit and thermal gradient).

Related resources & featured models: Explore 23248 CA/W33, compare 241 Series, review C3 Clearance Guide and Cage Selection Guide, or contact ZQM Bearings.

SERIES FAQ

232 Series Selection & Supply FAQ

How many 232 series bearing models are listed, and what bore sizes are covered?

This table lists 42 verified 232 series designations from the ZQM General Catalogue spanning bore diameters from 100 mm to 900 mm. Open any model row to inspect full boundary dimensions, catalog load ratings, reference mass, and mounting abutments (da min / Da max / ra max).

What bore taper (K 1:12 vs K30) and clearance options apply to the 232 series?

Standard 232 series spherical roller bearings use cylindrical bore or 1:12 tapered bore (suffix K, compatible with standard H-series adapter sleeves where applicable; 1:30 K30 applies only to 240/241 series). Always verify radial clearance (CN, C3, C4) and cage design against the catalog or drawing.

Are 232 series dimensions directly interchangeable with SKF, FAG, NSK, or NTN?

Listed boundary dimensions follow ISO 15 / ISO 104 / ISO 355 nominal envelopes for cross-referencing against SKF, FAG, NSK, and NTN. Because internal roller geometry, cage design, lubrication grooves, and tolerance classes vary by manufacturer, nominal equivalence does not guarantee direct interchangeability — confirm full original designations or drawings before substitution.

How do I request a factory quote or CAD drawing for 232 series bearings?

Backed by our Wafangdian factory, Ningbo export team, and Shanghai consolidation hub, ZQM supports trial orders, mixed-model MRO lists, and scheduled OEM shipments. Submit your designations, bore/clearance specs, quantity, and destination port via our Contact Us page.

FROM SPECIFICATION TO SUPPLY

Request a Quotation for 232 Series Bearings

One model or a mixed industrial list. Share your complete designation, clearance, and quantity with ZQM Bearings Wafangdian factory & Ningbo export team.

1. Complete DesignationInclude full cage, lube & bore suffixes (CA/W33, EM, K/K30)
2. Bore & ClearanceSpecify straight vs. 1:12 K / 1:30 K30 and CN / C3 / C4
3. Operating ConditionsShare machine position, speed, load & QC documentation
4. Quantity & PackingConfirm trial lot or OEM volume, export crate & destination
Scroll to Top