232 SERIES · SPHERICAL ROLLER BEARING
23268CA/W33 Spherical Roller Bearing Dimensions & Specifications
23268CA/W33 spherical roller bearing: 340 mm bore (d), 620 mm outside diameter (D), 224 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 340 mm |
|---|---|
| Outside diameter D | 620 mm |
| Width B | 224 mm |
| Mass | 295 kg |
| Catalogue dynamic load Cr | 4400 kN |
| Catalogue static load Cor | 7800 kN |
| Grease-lubricated speed | 400 rpm |
| Oil-lubricated speed | 530 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 592 mm |
|---|---|
| Abutment dimension da | 368 mm |
| Minimum chamfer r12 | 6 mm |
| Factor Y0 | 1.8 |
| Factor Y1 | 1.9 |
| Factor Y2 | 2.8 |
| Factor e | 0.36 |
| Maximum fillet ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 23268CA/W33?
The 23268CA/W33 catalogue lists da min = 368 mm; Da max = 592 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 23268CA/W33?
The listed values for 23268CA/W33 are grease: 400 rpm; oil: 530 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 23268CA/W33?
The catalogue reference mass for 23268CA/W33 is 295 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
| Model | Type | Dimensions (d×D×B) |
|---|---|---|
| 23868CA/W33 | Spherical Roller Bearing | 340 × 420 × 60 mm |
| 23968CA/W33 | Spherical Roller Bearing | 340 × 460 × 90 mm |
| 24068CA/W33 | Spherical Roller Bearing | 340 × 520 × 180 mm |
| 23068CA/W33 | Spherical Roller Bearing | 340 × 520 × 133 mm |
| 23168CA/W33 | Spherical Roller Bearing | 340 × 580 × 190 mm |
| 24168CA/W33 | Spherical Roller Bearing | 340 × 580 × 243 mm |
Compare alternative series sharing the same 340 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
- CA vs CC vs MB vs E Cages in Spherical Roller Bearings: Vibration, Speed & QC
- Tapered Bore Bearings: 1:12 (K) vs 1:30 (K30), Adapter and Withdrawal Sleeves
- Spherical Roller Bearing Series Selection: 239 vs 230 vs 240 vs 231 vs 232 vs 222/223
- 232 Series Spherical Roller Bearings
- Tapered Bore Clearance Calculator
DIRECT FACTORY SOURCING
Request a Quote for 23268CA/W33
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

