294 SERIES · SPHERICAL ROLLER THRUST BEARING
294/800 Spherical Roller Thrust Bearing Dimensions & Specifications
294/800 spherical roller thrust bearing: 800 mm bore (d), 1360 mm outside diameter (D), 335 mm height (H). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 800 mm |
|---|---|
| Outside diameter D | 1360 mm |
| Total height H | 335 mm |
| Housing washer height C | 162 mm |
| Mass | 2010 kg |
| Catalogue dynamic load Ca | 16600 kN |
| Catalogue static load Coa | 77500 kN |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 1175 mm |
|---|---|
| Abutment dimension da | 1060 mm |
| Minimum chamfer r12 | 15 mm |
| Diameter D1 | 1030 mm |
| Diameter d1 | 1300 mm |
| Maximum fillet ra | 12 mm |
| Offset S | 445 mm |
| Shaft washer height B | 121 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Catalog Nominal Cross-References (Brand / Legacy Codes)
Envelope reference only · Verify interchangeability| Brand / Code Type | Reference Code | Catalogue Source |
|---|---|---|
| Legacy Code | 90394/800 | ZQM Catalogue P.257 |
Notice: Cross-references above are listed from the ZQM Master Catalogue for nominal boundary-dimension lookup only. Internal clearance, cage design, roller profile, and load ratings vary by manufacturer; verify drawings before substitution.
Selection & installation
Which mounting dimensions are listed for 294/800?
The 294/800 catalogue lists da min = 1060 mm; Da max = 1175 mm; ra max = 12 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 294/800?
The catalogue reference mass for 294/800 is 2010 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of 294/800?
In the ZQM General Catalogue, 294/800 has nominal boundary dimensions of Array. Catalog load ratings: Ca 16600 kN, C0a 77500 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
What lubrication and minimum load rules apply to 294/800 spherical roller thrust bearing?
294/800 (800 × 1360 × 335 mm, total height H = 335 mm and housing washer height C = 162 mm) uses ISO 104 asymmetrical barrel rollers on a self-aligning spherical housing washer for high unidirectional axial loads. Oil lubrication is preferred under heavy load or continuous duty, and adequate minimum axial load must be maintained to prevent roller skidding.
| Model | Type | Dimensions (d×D×B) |
|---|---|---|
| 248/800CAF3/W33 | Spherical Roller Bearing | 800 × 980 × 180 mm |
| NJ18/800 | Cylindrical Roller Bearing | 800 × 980 × 82 mm |
| NU38/800 | Cylindrical Roller Bearing | 800 × 980 × 136 mm |
Compare alternative series sharing the same 800 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
- Spherical Roller Thrust Bearings (293 vs 294): Minimum Axial Load, Oil Lubrication, and Alignment
- 29000 Series Spherical Roller Thrust Bearings (292, 293, 294): Housing, Minimum Load & Oil Bath
- Bearing Cross Reference & ISO Suffix Guide: Comparing SKF, FAG, NSK, NTN and ZQM
- 294 Series Spherical Roller Thrust Bearings
- ISO 281 Bearing Life Calculator
DIRECT FACTORY SOURCING
Request a Quote for 294/800
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

