294 SERIES · SPHERICAL ROLLER THRUST BEARING
294/800A Spherical Roller Thrust Bearing Dimensions & Specifications
294/800A spherical roller thrust bearing: 800 mm bore (d), 1360 mm outside diameter (D), 335 mm height (H). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 800 mm |
|---|---|
| Outside diameter D | 1360 mm |
| Total height H | 335 mm |
| Housing washer height C | 165 mm |
| Mass | 1658 kg |
| Catalogue dynamic load Ca | 20200 kN |
| Catalogue static load Coa | 93000 kN |
Mounting dimensions & additional parameters (5)
| Minimum chamfer r12 | 15 mm |
|---|---|
| Diameter D1 | 1034 mm |
| Diameter d1 | 1160 mm |
| Offset S | 462 mm |
| Shaft washer height B | 185 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
What is the reference mass of 294/800A?
The catalogue reference mass for 294/800A is 1658 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of 294/800A?
In the ZQM General Catalogue, 294/800A has nominal boundary dimensions of Array. Catalog load ratings: Ca 20200 kN, C0a 93000 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
What lubrication and minimum load rules apply to 294/800A spherical roller thrust bearing?
294/800A (800 × 1360 × 335 mm, total height H = 335 mm and housing washer height C = 165 mm) uses ISO 104 asymmetrical barrel rollers on a self-aligning spherical housing washer for high unidirectional axial loads. Oil lubrication is preferred under heavy load or continuous duty, and adequate minimum axial load must be maintained to prevent roller skidding.
| Model | Type | Dimensions (d×D×B) |
|---|---|---|
| 248/800CAF3/W33 | Spherical Roller Bearing | 800 × 980 × 180 mm |
| NJ18/800 | Cylindrical Roller Bearing | 800 × 980 × 82 mm |
| NU38/800 | Cylindrical Roller Bearing | 800 × 980 × 136 mm |
Compare alternative series sharing the same 800 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
- Spherical Roller Thrust Bearings (293 vs 294): Minimum Axial Load, Oil Lubrication, and Alignment
- 29000 Series Spherical Roller Thrust Bearings (292, 293, 294): Housing, Minimum Load & Oil Bath
- Bearing Cross Reference & ISO Suffix Guide: Comparing SKF, FAG, NSK, NTN and ZQM
- 294 Series Spherical Roller Thrust Bearings
- ISO 281 Bearing Life Calculator
DIRECT FACTORY SOURCING
Request a Quote for 294/800A
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

