FC46 SERIES · FOUR-ROW CYLINDRICAL ROLLER BEARING
FC4666170 Four-Row Cylindrical Roller Bearing Dimensions & Specifications
FC4666170 four-row cylindrical roller bearing: 230 mm bore (d), 330 mm outside diameter (D), 170 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 230 mm |
|---|---|
| Outside diameter D | 330 mm |
| Width B | 170 mm |
| Mass | 47.4 kg |
| Catalogue dynamic load Cr | 1150 kN |
| Catalogue static load Cor | 2970 kN |
Mounting dimensions & additional parameters (4)
| Minimum chamfer r12 | 2.1 mm |
|---|---|
| Minimum chamfer r34 | 2.1 mm |
| Catalogue figure code fig | 2 |
| Roller envelope diameter Fw | 260 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
What is the reference mass of FC4666170?
The catalogue reference mass for FC4666170 is 47.4 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of FC4666170?
In the ZQM General Catalogue, FC4666170 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1150 kN, C0r 2970 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
Can FC4666170 four-row cylindrical roller bearing carry axial loads?
FC4666170 (230 × 330 × 170 mm) is a four-row cylindrical roller mill bearing built purely for heavy radial roll-neck loads; pair it with a separate axial locating bearing. Its nominal under-roller envelope Fw is 260 mm. Catalog radial ratings are Cr 1150 kN and C0r 2970 kN. Confirm Fw envelope and matched-set radial clearance against engineering drawings before interchanging inner rings across roll necks.
| Model | Type | Dimensions (d×D×B) |
|---|---|---|
| 61946X3M | Deep Groove Ball Bearing | 230 × 329.5 × 40 mm |
Compare alternative series sharing the same 230 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
DIRECT FACTORY SOURCING
Request a Quote for FC4666170
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

