FC48 SERIES · FOUR-ROW CYLINDRICAL ROLLER BEARING
FC4868220/YA3 Four-Row Cylindrical Roller Bearing Dimensions & Specifications
FC4868220/YA3 four-row cylindrical roller bearing: 240 mm bore (d), 340 mm outside diameter (D), 220 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 240 mm |
|---|---|
| Outside diameter D | 340 mm |
| Width B | 220 mm |
| Mass | 71.0 kg |
| Catalogue dynamic load Cr | 1670 kN |
| Catalogue static load Cor | 3530 kN |
Mounting dimensions & additional parameters (4)
| Minimum chamfer r12 | 3.0 mm |
|---|---|
| Minimum chamfer r34 | 3.0 mm |
| Catalogue figure code fig | 1 |
| Roller envelope diameter Fw | 268 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Catalog Nominal Cross-References (Brand / Legacy Codes)
Envelope reference only · Verify interchangeability| Brand / Code Type | Reference Code | Catalogue Source |
|---|---|---|
| NSK | 240RV3403 | ZQM Catalogue P.97 |
| KOYO | 48FC34220 | ZQM Catalogue P.97 |
| FAG | 513703 | ZQM Catalogue P.97 |
Notice: Cross-references above are listed from the ZQM Master Catalogue for nominal boundary-dimension lookup only. Internal clearance, cage design, roller profile, and load ratings vary by manufacturer; verify drawings before substitution.
Selection & installation
What is the reference mass of FC4868220/YA3?
The catalogue reference mass for FC4868220/YA3 is 71.0 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of FC4868220/YA3?
In the ZQM General Catalogue, FC4868220/YA3 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1670 kN, C0r 3530 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
Can FC4868220/YA3 four-row cylindrical roller bearing carry axial loads?
FC4868220/YA3 (240 × 340 × 220 mm) is a four-row cylindrical roller mill bearing built purely for heavy radial roll-neck loads; pair it with a separate axial locating bearing. Its nominal under-roller envelope Fw is 268 mm. Catalog radial ratings are Cr 1670 kN and C0r 3530 kN. Confirm Fw envelope and matched-set radial clearance against engineering drawings before interchanging inner rings across roll necks.
| Model | Type | Dimensions (d×D×B) |
|---|---|---|
| 61848MA | Deep Groove Ball Bearing | 240 × 300 × 28 mm |
Compare alternative series sharing the same 240 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
DIRECT FACTORY SOURCING
Request a Quote for FC4868220/YA3
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

