FC48 SERIES · FOUR-ROW CYLINDRICAL ROLLER BEARING

FC4870220 Four-Row Cylindrical Roller Bearing Dimensions & Specifications

FC4870220 four-row cylindrical roller bearing: 240 mm bore (d), 350 mm outside diameter (D), 220 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 240 mmD 350 mmB 220 mmCr 1780 kNMass 71.0 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Fw 270Four-Row Cylindrical Rolling Mill Bearingd 240D 350B 220

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d240 mm
Outside diameter D350 mm
Width B220 mm
Mass71.0 kg
Catalogue dynamic load Cr1780 kN
Catalogue static load Cor3870 kN
Mounting dimensions & additional parameters (4)
Minimum chamfer r123.0 mm
Minimum chamfer r343.0 mm
Catalogue figure code fig2
Roller envelope diameter Fw270 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of FC4870220?

The catalogue reference mass for FC4870220 is 71.0 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of FC4870220?

In the ZQM General Catalogue, FC4870220 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1780 kN, C0r 3870 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

Can FC4870220 four-row cylindrical roller bearing carry axial loads?

FC4870220 (240 × 350 × 220 mm) is a four-row cylindrical roller mill bearing built purely for heavy radial roll-neck loads; pair it with a separate axial locating bearing. Its nominal under-roller envelope Fw is 270 mm. Catalog radial ratings are Cr 1780 kN and C0r 3870 kN. Confirm Fw envelope and matched-set radial clearance against engineering drawings before interchanging inner rings across roll necks.

Other Bearing Series with 240 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
61848MADeep Groove Ball Bearing240 × 300 × 28 mm

Compare alternative series sharing the same 240 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for FC4870220

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top