FC50 SERIES · FOUR-ROW CYLINDRICAL ROLLER BEARING

FC5068220 Four-Row Cylindrical Roller Bearing Dimensions & Specifications

FC5068220 four-row cylindrical roller bearing: 250 mm bore (d), 340 mm outside diameter (D), 220 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 250 mmD 340 mmB 220 mmCr 1330 kNMass 52.8 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Fw 274Four-Row Cylindrical Rolling Mill Bearingd 250D 340B 220

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d250 mm
Outside diameter D340 mm
Width B220 mm
Mass52.8 kg
Catalogue dynamic load Cr1330 kN
Catalogue static load Cor3120 kN
Mounting dimensions & additional parameters (4)
Minimum chamfer r123.0 mm
Minimum chamfer r343.0 mm
Catalogue figure code fig2
Roller envelope diameter Fw274 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of FC5068220?

The catalogue reference mass for FC5068220 is 52.8 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of FC5068220?

In the ZQM General Catalogue, FC5068220 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1330 kN, C0r 3120 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

Can FC5068220 four-row cylindrical roller bearing carry axial loads?

FC5068220 (250 × 340 × 220 mm) is a four-row cylindrical roller mill bearing built purely for heavy radial roll-neck loads; pair it with a separate axial locating bearing. Its nominal under-roller envelope Fw is 274 mm. Catalog radial ratings are Cr 1330 kN and C0r 3120 kN. Confirm Fw envelope and matched-set radial clearance against engineering drawings before interchanging inner rings across roll necks.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for FC5068220

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top