FC50 SERIES · FOUR-ROW CYLINDRICAL ROLLER BEARING

FC5070220A Four-Row Cylindrical Roller Bearing Dimensions & Specifications

FC5070220A four-row cylindrical roller bearing: 250 mm bore (d), 350 mm outside diameter (D), 220 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 250 mmD 350 mmB 220 mmCr 1670 kNMass 58.0 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Fw 274Four-Row Cylindrical Rolling Mill Bearingd 250D 350B 220

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d250 mm
Outside diameter D350 mm
Width B220 mm
Mass58.0 kg
Catalogue dynamic load Cr1670 kN
Catalogue static load Cor3640 kN
Mounting dimensions & additional parameters (4)
Minimum chamfer r123.0 mm
Minimum chamfer r343.0 mm
Catalogue figure code fig4
Roller envelope diameter Fw274 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of FC5070220A?

The catalogue reference mass for FC5070220A is 58.0 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of FC5070220A?

In the ZQM General Catalogue, FC5070220A has nominal boundary dimensions of Array. Catalog load ratings: Cr 1670 kN, C0r 3640 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

Can FC5070220A four-row cylindrical roller bearing carry axial loads?

FC5070220A (250 × 350 × 220 mm) is a four-row cylindrical roller mill bearing built purely for heavy radial roll-neck loads; pair it with a separate axial locating bearing. Its nominal under-roller envelope Fw is 274 mm. Catalog radial ratings are Cr 1670 kN and C0r 3640 kN. Confirm Fw envelope and matched-set radial clearance against engineering drawings before interchanging inner rings across roll necks.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for FC5070220A

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top