FC50 SERIES · FOUR-ROW CYLINDRICAL ROLLER BEARING

FC5072220 Four-Row Cylindrical Roller Bearing Dimensions & Specifications

FC5072220 four-row cylindrical roller bearing: 250 mm bore (d), 360 mm outside diameter (D), 220 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 250 mmD 360 mmB 220 mmCr 1810 kNMass 73.0 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Fw 282Four-Row Cylindrical Rolling Mill Bearingd 250D 360B 220

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d250 mm
Outside diameter D360 mm
Width B220 mm
Mass73.0 kg
Catalogue dynamic load Cr1810 kN
Catalogue static load Cor4240 kN
Mounting dimensions & additional parameters (4)
Minimum chamfer r123.0 mm
Minimum chamfer r343.0 mm
Catalogue figure code fig4
Roller envelope diameter Fw282 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Catalog Nominal Cross-References (Brand / Legacy Codes)

Envelope reference only · Verify interchangeability
Brand / Code TypeReference CodeCatalogue Source
Legacy Code672750KZQM Catalogue P.97

Notice: Cross-references above are listed from the ZQM Master Catalogue for nominal boundary-dimension lookup only. Internal clearance, cage design, roller profile, and load ratings vary by manufacturer; verify drawings before substitution.

Selection & installation

What is the reference mass of FC5072220?

The catalogue reference mass for FC5072220 is 73.0 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of FC5072220?

In the ZQM General Catalogue, FC5072220 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1810 kN, C0r 4240 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

Can FC5072220 four-row cylindrical roller bearing carry axial loads?

FC5072220 (250 × 360 × 220 mm) is a four-row cylindrical roller mill bearing built purely for heavy radial roll-neck loads; pair it with a separate axial locating bearing. Its nominal under-roller envelope Fw is 282 mm. Catalog radial ratings are Cr 1810 kN and C0r 4240 kN. Confirm Fw envelope and matched-set radial clearance against engineering drawings before interchanging inner rings across roll necks.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for FC5072220

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top