FCD50 SERIES · FOUR-ROW CYLINDRICAL ROLLER BEARING

FCD5068230 Four-Row Cylindrical Roller Bearing Dimensions & Specifications

FCD5068230 four-row cylindrical roller bearing: 250 mm bore (d), 340 mm outside diameter (D), 230 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 250 mmD 340 mmB 230 mmCr 1700 kNMass 65.0 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Fw 270Four-Row Cylindrical Rolling Mill Bearingd 250D 340B 230

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d250 mm
Outside diameter D340 mm
Width B230 mm
Mass65.0 kg
Catalogue dynamic load Cr1700 kN
Catalogue static load Cor4350 kN
Mounting dimensions & additional parameters (4)
Minimum chamfer r123.0 mm
Minimum chamfer r343.0 mm
Catalogue figure code fig4
Roller envelope diameter Fw270 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of FCD5068230?

The catalogue reference mass for FCD5068230 is 65.0 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of FCD5068230?

In the ZQM General Catalogue, FCD5068230 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1700 kN, C0r 4350 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

Can FCD5068230 four-row cylindrical roller bearing carry axial loads?

FCD5068230 (250 × 340 × 230 mm) is a four-row cylindrical roller mill bearing built purely for heavy radial roll-neck loads; pair it with a separate axial locating bearing. Its nominal under-roller envelope Fw is 270 mm. Catalog radial ratings are Cr 1700 kN and C0r 4350 kN. Confirm Fw envelope and matched-set radial clearance against engineering drawings before interchanging inner rings across roll necks.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for FCD5068230

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top