NN30 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN30/1000 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN30/1000 double-row cylindrical roller bearing: 1000 mm bore (d), 1420 mm outside diameter (D), 308 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1000 mmD 1420 mmB/C 308 mmCr 10100 kNMass 1400 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 1000D 1420B 308

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1000 mm
Outside diameter D1420 mm
Mass1400 kg
Catalogue dynamic load Cr10100 kN
Catalogue static load Cor24500 kN
Mounting dimensions & additional parameters (7)
Abutment dimension Da1387 mm
Minimum chamfer r127.5 mm
Minimum chamfer r347.5 mm
Maximum fillet ra6 mm
Maximum fillet rb6 mm
Catalogue speed (see source conditions) speed290 rpm
Shared B/C dimension (catalogue column) BC308 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN30/1000?

The NN30/1000 catalogue lists Da max = 1387 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN30/1000?

The catalogue reference mass for NN30/1000 is 1400 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN30/1000?

In the ZQM General Catalogue, NN30/1000 has nominal boundary dimensions of Array. Catalog load ratings: Cr 10100 kN, C0r 24500 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN30/1000 double-row cylindrical roller bearing?

NN30/1000 (1000 × 1420 × 308 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN30/1000

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top