NN30 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN30/1060 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN30/1060 double-row cylindrical roller bearing: 1060 mm bore (d), 1500 mm outside diameter (D), 325 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1060 mmD 1500 mmB/C 325 mmCr 11000 kNMass 1650 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 1060D 1500B 325

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1060 mm
Outside diameter D1500 mm
Mass1650 kg
Catalogue dynamic load Cr11000 kN
Catalogue static load Cor27500 kN
Mounting dimensions & additional parameters (7)
Abutment dimension Da1460 mm
Minimum chamfer r129.5 mm
Minimum chamfer r349.5 mm
Maximum fillet ra8 mm
Maximum fillet rb8 mm
Catalogue speed (see source conditions) speed290 rpm
Shared B/C dimension (catalogue column) BC325 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN30/1060?

The NN30/1060 catalogue lists Da max = 1460 mm; ra max = 8 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN30/1060?

The catalogue reference mass for NN30/1060 is 1650 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN30/1060?

In the ZQM General Catalogue, NN30/1060 has nominal boundary dimensions of Array. Catalog load ratings: Cr 11000 kN, C0r 27500 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN30/1060 double-row cylindrical roller bearing?

NN30/1060 (1060 × 1500 × 325 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Other Bearing Series with 1060 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
N28/1060Cylindrical Roller Bearing1060 × 1280 × 128 mm
NU38/1060Cylindrical Roller Bearing1060 × 1280 × 165 mm

Compare alternative series sharing the same 1060 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN30/1060

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top