NN30 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN30/500 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN30/500 double-row cylindrical roller bearing: 500 mm bore (d), 720 mm outside diameter (D), 167 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 500 mmD 720 mmB/C 167 mmCr 2580 kNMass 210 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 500D 720B 167

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d500 mm
Outside diameter D720 mm
Mass210 kg
Catalogue dynamic load Cr2580 kN
Catalogue static load Cor5600 kN
Mounting dimensions & additional parameters (7)
Abutment dimension Da694 mm
Minimum chamfer r126 mm
Minimum chamfer r346 mm
Maximum fillet ra5 mm
Maximum fillet rb5 mm
Catalogue speed (see source conditions) speed1100 rpm
Shared B/C dimension (catalogue column) BC167 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN30/500?

The NN30/500 catalogue lists Da max = 694 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN30/500?

The catalogue reference mass for NN30/500 is 210 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN30/500?

In the ZQM General Catalogue, NN30/500 has nominal boundary dimensions of Array. Catalog load ratings: Cr 2580 kN, C0r 5600 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN30/500 double-row cylindrical roller bearing?

NN30/500 (500 × 720 × 167 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN30/500

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top