NN30 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3096 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3096 double-row cylindrical roller bearing: 480 mm bore (d), 700 mm outside diameter (D), 165 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 480 mmD 700 mmB/C 165 mmCr 2700 kNMass 200 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 480D 700B 165

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d480 mm
Outside diameter D700 mm
Mass200 kg
Catalogue dynamic load Cr2700 kN
Catalogue static load Cor5850 kN
Mounting dimensions & additional parameters (7)
Abutment dimension Da674 mm
Minimum chamfer r126 mm
Minimum chamfer r346 mm
Maximum fillet ra5 mm
Maximum fillet rb5 mm
Catalogue speed (see source conditions) speed1100 rpm
Shared B/C dimension (catalogue column) BC165 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3096?

The NN3096 catalogue lists Da max = 674 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3096?

The catalogue reference mass for NN3096 is 200 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3096?

In the ZQM General Catalogue, NN3096 has nominal boundary dimensions of Array. Catalog load ratings: Cr 2700 kN, C0r 5850 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3096 double-row cylindrical roller bearing?

NN3096 (480 × 700 × 165 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3096

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top