NN30 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN30/800 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN30/800 double-row cylindrical roller bearing: 800 mm bore (d), 1150 mm outside diameter (D), 258 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 800 mmD 1150 mmB/C 258 mmCr 7810 kNMass 790 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 800D 1150B 258

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d800 mm
Outside diameter D1150 mm
Mass790 kg
Catalogue dynamic load Cr7810 kN
Catalogue static load Cor18000 kN
Mounting dimensions & additional parameters (7)
Abutment dimension Da1117 mm
Minimum chamfer r127.5 mm
Minimum chamfer r347.5 mm
Maximum fillet ra6 mm
Maximum fillet rb6 mm
Catalogue speed (see source conditions) speed360 rpm
Shared B/C dimension (catalogue column) BC258 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN30/800?

The NN30/800 catalogue lists Da max = 1117 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN30/800?

The catalogue reference mass for NN30/800 is 790 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN30/800?

In the ZQM General Catalogue, NN30/800 has nominal boundary dimensions of Array. Catalog load ratings: Cr 7810 kN, C0r 18000 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN30/800 double-row cylindrical roller bearing?

NN30/800 (800 × 1150 × 258 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN30/800

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top