NN30 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN30/850 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN30/850 double-row cylindrical roller bearing: 850 mm bore (d), 1220 mm outside diameter (D), 272 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 850 mmD 1220 mmB/C 272 mmCr 7920 kNMass 480 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 850D 1220B 272

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d850 mm
Outside diameter D1220 mm
Mass480 kg
Catalogue dynamic load Cr7920 kN
Catalogue static load Cor18600 kN
Mounting dimensions & additional parameters (7)
Abutment dimension Da1187 mm
Minimum chamfer r127.5 mm
Minimum chamfer r347.5 mm
Maximum fillet ra6 mm
Maximum fillet rb6 mm
Catalogue speed (see source conditions) speed340 rpm
Shared B/C dimension (catalogue column) BC272 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN30/850?

The NN30/850 catalogue lists Da max = 1187 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN30/850?

The catalogue reference mass for NN30/850 is 480 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN30/850?

In the ZQM General Catalogue, NN30/850 has nominal boundary dimensions of Array. Catalog load ratings: Cr 7920 kN, C0r 18600 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN30/850 double-row cylindrical roller bearing?

NN30/850 (850 × 1220 × 272 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Other Bearing Series with 850 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
238/850CAF3/W33Spherical Roller Bearing850 × 1030 × 136 mm
618/850F1Deep Groove Ball Bearing850 × 1030 × 82 mm
NU28/850Cylindrical Roller Bearing850 × 1030 × 106 mm

Compare alternative series sharing the same 850 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN30/850

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top