NN30 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3044 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3044 double-row cylindrical roller bearing: 220 mm bore (d), 340 mm outside diameter (D), 90 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 220 mmD 340 mmB/C 90 mmCr 809 kNMass 28.5 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 220D 340B 90

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d220 mm
Outside diameter D340 mm
Mass28.5 kg
Catalogue dynamic load Cr809 kN
Catalogue static load Cor1460 kN
Mounting dimensions & additional parameters (7)
Abutment dimension Da327 mm
Minimum chamfer r123 mm
Minimum chamfer r343 mm
Maximum fillet ra2.5 mm
Maximum fillet rb2.5 mm
Catalogue speed (see source conditions) speed2600 rpm
Shared B/C dimension (catalogue column) BC90 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3044?

The NN3044 catalogue lists Da max = 327 mm; ra max = 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3044?

The catalogue reference mass for NN3044 is 28.5 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3044?

In the ZQM General Catalogue, NN3044 has nominal boundary dimensions of Array. Catalog load ratings: Cr 809 kN, C0r 1460 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3044 double-row cylindrical roller bearing?

NN3044 (220 × 340 × 90 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3044

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top