NN30 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING
NN3048 Double-Row Cylindrical Roller Bearing Dimensions & Specifications
NN3048 double-row cylindrical roller bearing: 240 mm bore (d), 360 mm outside diameter (D), 92 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 240 mm |
|---|---|
| Outside diameter D | 360 mm |
| Mass | 32.0 kg |
| Catalogue dynamic load Cr | 842 kN |
| Catalogue static load Cor | 1560 kN |
Mounting dimensions & additional parameters (7)
| Abutment dimension Da | 347 mm |
|---|---|
| Minimum chamfer r12 | 3 mm |
| Minimum chamfer r34 | 3 mm |
| Maximum fillet ra | 2.5 mm |
| Maximum fillet rb | 2.5 mm |
| Catalogue speed (see source conditions) speed | 2400 rpm |
| Shared B/C dimension (catalogue column) BC | 92 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NN3048?
The NN3048 catalogue lists Da max = 347 mm; ra max = 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of NN3048?
The catalogue reference mass for NN3048 is 32.0 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of NN3048?
In the ZQM General Catalogue, NN3048 has nominal boundary dimensions of Array. Catalog load ratings: Cr 842 kN, C0r 1560 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
What rib and bore features define NN3048 double-row cylindrical roller bearing?
NN3048 (240 × 360 × 92 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.
| Model | Type | Dimensions (d×D×B) |
|---|---|---|
| 61848MA | Deep Groove Ball Bearing | 240 × 300 × 28 mm |
Compare alternative series sharing the same 240 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
DIRECT FACTORY SOURCING
Request a Quote for NN3048
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

