NN30 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3064 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3064 double-row cylindrical roller bearing: 320 mm bore (d), 480 mm outside diameter (D), 121 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 320 mmD 480 mmB/C 121 mmCr 1320 kNMass 74.0 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 320D 480B 121

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d320 mm
Outside diameter D480 mm
Mass74.0 kg
Catalogue dynamic load Cr1320 kN
Catalogue static load Cor2600 kN
Mounting dimensions & additional parameters (7)
Abutment dimension Da464 mm
Minimum chamfer r124 mm
Minimum chamfer r344 mm
Maximum fillet ra3 mm
Maximum fillet rb3 mm
Catalogue speed (see source conditions) speed1800 rpm
Shared B/C dimension (catalogue column) BC121 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3064?

The NN3064 catalogue lists Da max = 464 mm; ra max = 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3064?

The catalogue reference mass for NN3064 is 74.0 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3064?

In the ZQM General Catalogue, NN3064 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1320 kN, C0r 2600 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3064 double-row cylindrical roller bearing?

NN3064 (320 × 480 × 121 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3064

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top