NN30 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3060 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3060 double-row cylindrical roller bearing: 300 mm bore (d), 460 mm outside diameter (D), 118 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 300 mmD 460 mmB/C 118 mmCr 1250 kNMass 68.5 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 300D 460B 118

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d300 mm
Outside diameter D460 mm
Mass68.5 kg
Catalogue dynamic load Cr1250 kN
Catalogue static load Cor2400 kN
Mounting dimensions & additional parameters (7)
Abutment dimension Da444 mm
Minimum chamfer r124 mm
Minimum chamfer r344 mm
Maximum fillet ra3 mm
Maximum fillet rb3 mm
Catalogue speed (see source conditions) speed1900 rpm
Shared B/C dimension (catalogue column) BC118 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3060?

The NN3060 catalogue lists Da max = 444 mm; ra max = 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3060?

The catalogue reference mass for NN3060 is 68.5 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3060?

In the ZQM General Catalogue, NN3060 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1250 kN, C0r 2400 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3060 double-row cylindrical roller bearing?

NN3060 (300 × 460 × 118 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3060

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top