NN30 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3084 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3084 double-row cylindrical roller bearing: 420 mm bore (d), 620 mm outside diameter (D), 150 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 420 mmD 620 mmB/C 150 mmCr 2120 kNMass 145 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 420D 620B 150

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d420 mm
Outside diameter D620 mm
Mass145 kg
Catalogue dynamic load Cr2120 kN
Catalogue static load Cor4500 kN
Mounting dimensions & additional parameters (7)
Abutment dimension Da600 mm
Minimum chamfer r125 mm
Minimum chamfer r345 mm
Maximum fillet ra4 mm
Maximum fillet rb4 mm
Catalogue speed (see source conditions) speed1300 rpm
Shared B/C dimension (catalogue column) BC150 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3084?

The NN3084 catalogue lists Da max = 600 mm; ra max = 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3084?

The catalogue reference mass for NN3084 is 145 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3084?

In the ZQM General Catalogue, NN3084 has nominal boundary dimensions of Array. Catalog load ratings: Cr 2120 kN, C0r 4500 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3084 double-row cylindrical roller bearing?

NN3084 (420 × 620 × 150 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3084

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top