NN30 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3088 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3088 double-row cylindrical roller bearing: 440 mm bore (d), 650 mm outside diameter (D), 157 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 440 mmD 650 mmB/C 157 mmCr 2360 kNMass 170 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 440D 650B 157

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d440 mm
Outside diameter D650 mm
Mass170 kg
Catalogue dynamic load Cr2360 kN
Catalogue static load Cor4900 kN
Mounting dimensions & additional parameters (7)
Abutment dimension Da624 mm
Minimum chamfer r126 mm
Minimum chamfer r346 mm
Maximum fillet ra5 mm
Maximum fillet rb5 mm
Catalogue speed (see source conditions) speed1200 rpm
Shared B/C dimension (catalogue column) BC157 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3088?

The NN3088 catalogue lists Da max = 624 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3088?

The catalogue reference mass for NN3088 is 170 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3088?

In the ZQM General Catalogue, NN3088 has nominal boundary dimensions of Array. Catalog load ratings: Cr 2360 kN, C0r 4900 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3088 double-row cylindrical roller bearing?

NN3088 (440 × 650 × 157 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3088

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top