NN31 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3128 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3128 double-row cylindrical roller bearing: 140 mm bore (d), 225 mm outside diameter (D), 68 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 140 mmD 225 mmB/C 68 mmCr 400 kNMass 10.1 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 140D 225B 68

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d140 mm
Outside diameter D225 mm
Mass10.1 kg
Catalogue dynamic load Cr400 kN
Catalogue static load Cor650 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da209 mm
Abutment dimension da155 mm
Minimum chamfer r122.1 mm
Minimum chamfer r342.1 mm
Maximum fillet ra2 mm
Maximum fillet rb2 mm
Catalogue speed (see source conditions) speed2600 rpm
Shared B/C dimension (catalogue column) BC68 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3128?

The NN3128 catalogue lists da min = 155 mm; Da max = 209 mm; ra max = 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3128?

The catalogue reference mass for NN3128 is 10.1 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3128?

In the ZQM General Catalogue, NN3128 has nominal boundary dimensions of Array. Catalog load ratings: Cr 400 kN, C0r 650 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3128 double-row cylindrical roller bearing?

NN3128 (140 × 225 × 68 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3128

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top