NN31 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3130 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3130 double-row cylindrical roller bearing: 150 mm bore (d), 250 mm outside diameter (D), 80 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 150 mmD 250 mmB/C 80 mmCr 535 kNMass 15.4 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 150D 250B 80

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d150 mm
Outside diameter D250 mm
Mass15.4 kg
Catalogue dynamic load Cr535 kN
Catalogue static load Cor860 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da234 mm
Abutment dimension da165 mm
Minimum chamfer r122.1 mm
Minimum chamfer r342.1 mm
Maximum fillet ra2 mm
Maximum fillet rb2 mm
Catalogue speed (see source conditions) speed2400 rpm
Shared B/C dimension (catalogue column) BC80 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3130?

The NN3130 catalogue lists da min = 165 mm; Da max = 234 mm; ra max = 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3130?

The catalogue reference mass for NN3130 is 15.4 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3130?

In the ZQM General Catalogue, NN3130 has nominal boundary dimensions of Array. Catalog load ratings: Cr 535 kN, C0r 860 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3130 double-row cylindrical roller bearing?

NN3130 (150 × 250 × 80 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3130

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top