NN31 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3132 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3132 double-row cylindrical roller bearing: 160 mm bore (d), 270 mm outside diameter (D), 86 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 160 mmD 270 mmB/C 86 mmCr 620 kNMass 19.8 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 160D 270B 86

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d160 mm
Outside diameter D270 mm
Mass19.8 kg
Catalogue dynamic load Cr620 kN
Catalogue static load Cor1000 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da253 mm
Abutment dimension da175 mm
Minimum chamfer r122.1 mm
Minimum chamfer r342.1 mm
Maximum fillet ra2 mm
Maximum fillet rb2 mm
Catalogue speed (see source conditions) speed2200 rpm
Shared B/C dimension (catalogue column) BC86 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3132?

The NN3132 catalogue lists da min = 175 mm; Da max = 253 mm; ra max = 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3132?

The catalogue reference mass for NN3132 is 19.8 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3132?

In the ZQM General Catalogue, NN3132 has nominal boundary dimensions of Array. Catalog load ratings: Cr 620 kN, C0r 1000 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3132 double-row cylindrical roller bearing?

NN3132 (160 × 270 × 86 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3132

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top