NN31 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3144 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3144 double-row cylindrical roller bearing: 220 mm bore (d), 370 mm outside diameter (D), 120 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 220 mmD 370 mmB/C 120 mmCr 1050 kNMass 51.9 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 220D 370B 120

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d220 mm
Outside diameter D370 mm
Mass51.9 kg
Catalogue dynamic load Cr1050 kN
Catalogue static load Cor1810 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da346 mm
Abutment dimension da241 mm
Minimum chamfer r124 mm
Minimum chamfer r344 mm
Maximum fillet ra3 mm
Maximum fillet rb3 mm
Catalogue speed (see source conditions) speed1500 rpm
Shared B/C dimension (catalogue column) BC120 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3144?

The NN3144 catalogue lists da min = 241 mm; Da max = 346 mm; ra max = 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3144?

The catalogue reference mass for NN3144 is 51.9 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3144?

In the ZQM General Catalogue, NN3144 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1050 kN, C0r 1810 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3144 double-row cylindrical roller bearing?

NN3144 (220 × 370 × 120 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3144

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top